TESTech Instrument(Suzhou) Technologies is founded by engineering professionals familiar with the highest international standard of quality, reliability and service. We are committed to meeting and serving the comprehensive needs of industry and research labs in the testing and development of fire-prevention and retardant materials, systems and instruments. Whether you need fire test equipment development, production, sales or service, contact us for one-stop solution. We're China's best fire-testing resource, so let us exceed your expectations!
Our major products include flame retardant testing instrument for building materials,cables and wires,Plastic Products,exterior wall thermal insulation materials,doors and windows,house furnishings, flooring materials,ornament materials, fire retardant coating,building elements,firefighting devices,ships,and so on.At the same time,we provide professional combustion test boxes as well as the project design, construction, technical consultation, training and other professional services.
The minimum ignition temperature tester is a way of testing the sensitivity of the ignition that the dust cloud is in the heated environment. When a lot of dust is exposed in heating the air and the air temperature is high enough, it may lead to spontaneous combustion. This method can test the minimum ignition temperature of combustible dust cloud.
Model: FTech- IEC 61241
IEC 61241-2-1:1994,EN 50281-2-1:1999,
1. The Test is carried on the in Godbert-Greenwald furnace.
2. The heating furnace is consist of the vertical quartz tubes . The hole is at the bottom of the tube.
3. Furnace operating temperature range: room temperature ~ 800 ºC
4.The operating temperature can rise to 1000 ºC to clean the the test chamber .
5. Temperature accuracy: ± 1% (higher than 500 ºC), ± 3% (lower than 300 ºC).
6. The pressure of the dispersion air chamber: 0 ~ 1 bar
7. The pressure accuracy of the air storage device : ± 5%
8. Size : 500X300X450 mm.
9. Power: 230v / 50Hz or 110v / 60Hz.
The Test is carried on the in Godbert-Greenwald furnace. The heating furnace is consist of the vertical quartz tubes . The hole is at the bottom of the tube.the glass observing room is connected with sample fixing device at the top of the quartz tubes. The compressed air from the tank blows the dust into the heating furnace and the sample fixing device ,and then exposed into the glass observing room and the quartz tubes .the heating furnace is located on the holder . And you can observe the ignition appearance from the bottom of the furnace. The test begins from the 500ºC. If you observe the ignition appearance ,you shall decrease the temperature at the 10ºC,until the ignition does not appear.
When the ignition occurs , the lowest temperature is recorded as the minimum ignition temperature of the dust cloud .
The minimum ignition temperature of the test data information is used to determine whether the surface temperature of the equipment can cause the automatic fire of the exposed dust . It is an important standard to evaluate the selection of the equipment at the condition of the dusty environment . When using the minimum ignition temperature testing data ,you shall leave a safety limit for the small-scale test .