Customization: | Available |
---|---|
After-sales Service: | Yes |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Lens Anti-Fog Performance Tester
Introduction
The sample must be tested under sealed condition; can automatically calculate the anti-fog performance of the sample; automatically detect and judge whether the anti-fog sample can pass the standard requirements; meet the requirements of domestic and foreign customers for anti-fog product testing standard requirements; 2,Function Description
Measure the anti-fog effect of the lens, utilizes a laser light source to emit a light source, through the refraction and reflection through the lens, and finally by the sensor to receive the laser light power, to determine whether the anti-fog effect.
Finally, the sensor receives the power of the laser light to determine whether there is an anti-fog effect.
Reference standard
EN168,EN174
Model: FTech-EN 168
Main parameter
Operating environment
Voltage:220V
Room temperature: (23±5)ºC
Relative humidity:(60±20)%.
Overall requirements of the instrument:
This tester is designed to fully comply with the requirements of the European EN168 specification, with the use of computer software.
Function specification
Detector: Diode that can receive signals.
Light source: laser light source; wavelength of (600 ± 70) nm, spot diameter of 10mm;
The receiver captures stray light at an angle of 0.75°.
Ring base: 35mm diameter, 24mm high;
Cushion diameter: 3mm thick and 3mm wide.
Fog-making water tank: total capacity of about 10L, including heating conduit, fog blowing fan, air pressure gate.
Heating system: frequency conversion heating controller, refer to EN168 standard; water temperature should be controlled at (50±0.5)ºC.
Analysis software: used with computer software, the software working system for Windows operating system, can instantly test optical data and time, record the test process, test data and results judgment, and can directly output the relevant data;
1. When get official order, equipment layout drawing and confirmation
2. Remote video training, installation guiding, trubleshooting by free.
3. On site training, installation guiding, all charges training fee+ traffic, hotel, board and lodging, Visa which provided by customer or paying.
4. 1 year warranty
5. Permanent software updated.