Water Spray Test Apparatus (Resistance to fire with water) with BS 6387-D3

After-sales Service: Yes
Warranty: 1 Year
Display: Digital
Control: Manual Control
Weight: 100-500Kg
Power Source: AC380V
Customization:
Gold Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
FTech-BS6387-D3
Transport Package
Plywood Package
Specification
1, 480(W) x 1, 200(D) x 1, 250(H)mm
Trademark
TESTech
Origin
China
HS Code
90248000
Production Capacity
100

Product Description



Products
This tester is designed according to the standard: BS6387 design this equipment is used to test wire and cable in overheating, over-current and other non-normal state to test flame retardant insulation layer. It is used to test cable test device current standard level, but also to test fire-resistant, waterproof status of the cable.
 
Model:FTech-BS6387-D3
Standard:• BS 6387 - Integrity test coil cable under fire conditions - Appendix D.3
MainFeatures
1, Propane burner, opening for 36x5mm, combustion temperature of 650±4°;
2, Standard burner tip width of 15mm, hole diameter 1.32mm, hole center distance of 3.2mm, staggered with 3 rows;
3, Equipped with sprinklers, sprinkler uniformity;
4, Thermocouple with a diameter of not more than ¢ 2'mm;
5, Equipped with calibrated bottles, water spilled may review and control at any time;
6, Sprinkler pressure range is 250Kpa ~ 350Kpa;
7, Spray water is 0.25ℓ / s / m ~ 0.30ℓ / s/m;
8, No need additional water supply system, the bottom of the box comes with a sink, can maintain the water cycle;
9, With the cover to protect the power unit, protect it from short circuit;
10, Burner fire source temperature reach to 650 + 50 °;
11, Voltage supply means having 3A or 2A fuse;
12, The material of test cabinet and sink is 304 stainless steel to prevent corrosion;
13, Sprinkler water pressure is 12~14kg/cm, meet the needs of spray;
14, The heat source is the stainless steel type burner propane burner with Venturi mixer;
15, Burner surface is 400×10mm, holes center distance is 3.2mm;
16, Automatic control solenoid valve gas source;
17, The test sample should be operating at rated voltage and current provisions, and comes with test status indicators reflect.
Specification
Model FTech-BS6387-D3
Size 1,480(W) x 1,200(D) x 1,250(H)mm
Console Size 600(W)×750(D)×1,200(H)mm
Power AC 220V 3-phase, 50/60Hz, 20A
Weight 150 kg
Instructions Provided
Exhaust Minimum 15m2 / min
Tool Vacuum cleaners,  compressed gas, propane gas

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now