Introduction:
TESTECH Limited Oxyen Index Tester for the determination under the test conditions specified in oxygen and nitrogen gas mixture just to maintain a minimum sample combustion oxygen concentration required. This tester equipped with the imported oxygen concentration sensor, to make sure the measurement accuracy and durability. For the assessment of the performance of a homogeneous combustion of solid materials, laminates, foams, films and films under specified conditions.
Standards:
ASTM D 2863, ISO 4589
Main features:
1, The oxygen concentration measurement range: 0~100%;
2, The oxygen concentration in accuracy of ± 0.1%
3, N2 mass flow controller range:1.0~15.0L/min;Accuracy:2%
4, O2 mass flow controller range:1.0~15.0L/min;Accuracy:2%
5. Oxygen sensor response time: <10s;
6.The gas flow rate in combustion tube is 40mm / s ± 2mm /s;
7, The gas flow rate in top of the combustion tube is 90mm ± 10mm/s;
8.The portable ignition flame can be adjusted.
9.The measurement time is 5mins, and the accuracy is ± 0.5s.10.Pressure meter accuracy is ± 1%;
11, Burning tube inner diameter: 80mm
12.Burning tube height: 500mm
13.Working pressure:0.1Mpa;
Main Features:
1.Equipped with a high temperature quartz glass tube, the outlet inner diameter is 40mm;
2.The rotor flowmeter regulates the flow of oxygen and nitrogen gas.
3.The gas flow mixing control unit is equipped with N2 and O2 mass flow controller to control the gas flow accurately.
4.Equipped with special ignition; portable and easy to operate
Control System:
1.The system automatically adjusts the oxygen concentration after the value is set;
2.The key electrical components are imported which are accurate, reliable and durable;
3.With a safety protection circuit;
Product Parameters
Model |
FTech-ISO 4589 |
Dimension |
550(L)×435(W)×670(H)mm |
Packing dimension |
710(W)×500(L)×510(H)mm |
Power |
AC 220V, 50/60Hz, 5A |
Weight |
30kg |
Detailed Photos
After Sales Service
1. When get official order, equipment layout drawing and confirmation
2. Remote video training, installation guiding, trubleshooting by free.
3. On site training, installation guiding, all charges training fee+ traffic, hotel, board and lodging, Visa which provided by customer or paying.
4. 1 year warranty
5. Permanent software updated
FAQ
1.What's the delivery time?
About 2~3months.
2.What's your guarantee terms?
The warranty of all products is 1 year. And we can supply life-long technical support.
3.Can you supply training?
We can supply training in our factory and online training for free.If onsite installation and training are required,please pay for tickets,accommodation and salary.